Shoulder Washers
Shoulder Washers
RoHS Compliant
Polyphenylene Sulfide PPS Shoulder Washers
Note: A single gate extension, not to exceed 0.64mm (0.025") in length, is allowable on the outside of all shoulder washers.
* Design allows insertion in the tab of a TO-220.
** Also for M3 Screw
40% glass filled polyphenylene sulfide (PPS).
Chemically inert [no known solvents under 200°C (392°F)]
Maximum recommended service temperature of 260°C (500°F)
Recommended torque is 0.565Nm to 0.678Nm (5 to 6 inch-pounds) on all shoulder washers except -7, which has recommended torque of 0.452Nm (4 inch-pounds).
![]() |
![]() |
![]() |
![]() |
Polyphenylene Sulfide PPS Shoulder Washers
Note: A single gate extension, not to exceed 0.64mm (0.025") in length, is allowable on the outside of all shoulder washers.
* Design allows insertion in the tab of a TO-220.
** Also for M3 Screw
Nylon Shoulder Washers
RoHS Compliant![]() |
![]() |
Check Distributor Stock
Enter a part number for
pricing and availability.
Enter a part number for
pricing and availability.








