Pentium 4 Microprocessor Datasheet

	Home \| Contact Us \| About Aavid \| Sales Rep Log In

Check distributor
part inventory

Products / Microprocessors / Desktop&Servers / 037863

037863 P4-2U High Performance Heat Sink For Use With the Pentium® 4 processor (423 Pin, Xeon™, Foster, Prestonia, Gallatin) Features and Benefits Designed to Cool up to 135W Design is Adaptable to Meet Demanding Applications High Thermal Performance vs. Cost Low Mass (230g) Open Design Allows for Multiple Airflow Directions Low Pressure Drop Design Robust Design Uses Multiple Heat Pipes High Performance Grease Interface Std. Two Std. CS64 Clips Included
Mechanical Outline Drawing	Easily Customizable Features Optimization of Fin Spacing to Your Application (See performance graphs for .050 gap version) Change Aluminum Base to Copper for a 2-4% Performance Increase (Adds 225g) Low Cost Base Designs Available for High Volume Production Customize heat sink overall height Other Possible Alterations Customized Fins (thickness, length, width, etc) Utilize Basic Concept for Other Processors & High Power Telco / Power Devices
Thermal Performance Notes: Tests Performed With Heat Pipes in the Vertical Orientation Typical Case-sink interface resistance = 0.02 to 0.04 °C/W Test results are based on using a 31mm X 31mm isothermal heat source.
Fully DuctedPerformance if Customized With Air 0.050" Gaps
Pentium® 4 is a registered trademark and Xeon™ is a trademark of Intel, Corp.