 |
|
Check distributor
part inventory
|
|
|
 |
|
|
 |
 Products / Interface Materials / Gap Fillers
|
|
|
A-PliTM
|
A-PliTM is a "super-soft" low durometer material designed to fill gaps
between hot components and their heat sinks or enclosure
(plastic or metal). The flexible, elastic nature of this
product allows it to blanket uneven surfaces, either
individually or as a group. Heat is conducted away from
the individual components, or an entire PCB, into metal
covers, frames, or spreader plates.
|
|
A-Pli is available in various cut sizes.
Please contact your local representative for more information.
| Physical Properties |
Units |
A-Pli
210 |
A-Pli
220 |
A-Pli
230 |
A-Pli
240 |
A-Pli
260 |
A-Pli
2120 |
A-Pli
2200 |
| Filler |
BN |
BN |
BN |
BN |
BN |
BN |
BN |
| Color |
Pink |
Blue |
Grey |
Yellow |
Grey |
Grey |
Grey |
Thermal Impedance
(@<1 psi) |
°C/in2/W |
0.10 |
0.18 |
0.24 |
0.32 |
0.44 |
0.80 |
1.3 |
| Thermal Conductivity |
W/m-K |
6 |
6 |
6 |
6 |
6 |
6 |
6 |
| Thickness |
inch
(mm) |
0.010
(.25) |
0.020
(.51) |
0.030
(.76) |
0.040
(1.02) |
0.060
(1.52) |
0.120
(3.05) |
0.200
(5.08) |
| tolerance +/- inch (mm) |
0.001 (0.03) |
0.002 (0.05) |
0.004 (0.10) |
0.006 (0.15) |
0.010 (0.25) |
0.010 (0.25) |
0.010 (0.25) |
| Dielectric Strength |
Volts/mil |
300 |
300 |
300 |
300 |
300 |
300 |
300 |
| Density |
g/cc |
1.28 |
1.28 |
1.28 |
1.28 |
1.28 |
1.28 |
1.28 |
| Hardness |
Shore A |
12 |
10 |
8 |
7 |
6 |
5 |
3 |
|
|
|
